The Actisense NMEA 2000 to NMEA 0183 Gateway is the easiest way to link between a boats old and new data networks. The NGW-1 / AIS / USB / STNG can convert NMEA 0183 data into NMEA 2000 data and vice-versa.
The Actisense NMEA 2000 to PC NGT-1 / USB Interface transfers NMEA 2000 messages to and from the NMEA 2000 bus using the Actisense Comms Dynamic Linked Library (DLL). This ensures that all Actisense certified PC software can send and receive pure NMEA 2000 data, without any translations getting in the way and changing the data.
This Actisense NMEA Multiplexer NDC-4 / USB Combiner allows connection of up to five NMEA (National Marine Electronics Association) inputs, and multiplexes / combines or autoswitches them to its two fully isolated NMEA outputs.
The Actisense OPTO-3 cable is an easy, safe and low-cost method of connecting an NMEA system to a laptop PC (and any other device with a standard RS232 9-pin port). Whilst protecting the most vital and expensive devices in the NMEA system, it also converts from the PC standard RS232 9-pin serial communications port to an NMEA 0183 (RS422) marine bus...
The Actisense USG-1 interface is an easy, safe and low-cost method of connecting a marine NMEA 0183 system to a USB equipped PC. Whilst protecting the most vital and expensive devices in the NMEA 0183 system, it also creates a virtual serial port that allows connection to an NMEA 0183 (RS422) marine bus link.
The Actisense USB to Serial (RS232) cable, provides an external plug'n'play RS232 serial connection for computers, notebooks, laptops, and handheld computing devices that support the USB specification. It comes with a standard D-type 9-pin male connector for the peripherals to plug into, and an attached 35 cm USB cable with a type A plug for...